離心風機的清洗是對其維護和保養相當重要的一項工作，那麽離心風機整機清洗時的注意事項有哪些呢？這就是接下來我們要為大家講解的相關問題了，請看下麵的具體闡述吧：離心風機在環境中運轉一段時間之後，各個縫隙中或零部件表麵都會積存一層汙垢，為了不影響離心風機的正常使用需要將風機的機殼和軸承箱拆卸下來進行徹底的清洗。
The cleaning of centrifugal fan is a very important work for its maintenance and maintenance. What are the precautions when cleaning the whole centrifugal fan? This is the next issue we will explain for you, please see the following specific elaboration: centrifugal fan in the environment for a period of time, each gap or parts surface will accumulate a layer of dirt, in order not to affect the normal use of centrifugal fan, the fan shell and bearing box need to be removed for thorough cleaning.
如果離心風機的這兩部分不先拆的話，就不能完成對於整個風機的整體清洗；其次就是我們在清洗的過程之中需要特別注意到的就是，不可以對電動機直聯傳動到風機部分進行拆卸清洗，以防發生電動機燒損的機械故障。
If these two parts of the centrifugal fan are not disassembled first, the whole cleaning of the whole fan can not be completed; secondly, in the cleaning process, we need to pay special attention to the fact that the motor directly connected to the fan can not be disassembled and cleaned in order to prevent the mechanical failure of motor burning.
完成離心風機的整機清洗之後還要將零部件組裝起來，首先使用成對斜墊鐵墊平並將其置於基礎上，其次不論是清洗還是組裝離心風機時都先對其調節機構進行檢測，查看其轉動的靈活性。
After cleaning the whole centrifugal fan, it is necessary to assemble the parts. Firstly, a pair of oblique cushion iron pads are used and laid on the foundation. Secondly, whether cleaning or assembling the centrifugal fan, the adjusting mechanism is tested first to check the flexibility of its rotation.
由此可見，在拆卸和組裝離心風機的時候應該先從那些要點想著手，我們注意了這些要點問題才能保證實際拆卸工作的準確性，同時降低完成清洗工作之後進行組裝時發生問題的可能性，保證了用戶可以正常進行使用風機，確保生產工作不受影響。
Therefore, when disassembling and assembling centrifugal fans, we should start with those key points. Only by paying attention to these key points can we ensure the accuracy of actual disassembly work, reduce the possibility of problems occurring in assembly after cleaning work, ensure that users can use the fans normally, and ensure that production work is not affected.
